P/N 64-304121-00 64-Pin 0.5mm TQFP-to-0.8mm QFP Adapter
FEATURES * A cost-effective means of upgrading without changing your PCB layout. GENERAL SPECIFICATIONS * BOARD MATERIAL: 0.062 thick FR-4 with 1-oz. Cu traces, both sides * PINS: 301 full-hard Stainless Steel * PIN PLATING: 200 [5.08] Sn/Pb 90/10 MIL-P-81728 over 100 [2.54] Ni per SAE AMS-QQ-N-290 * OPERATING TEMPERATURE: 221F [105C]
CUSTOMIZATION: In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the right to change product general specifications without notice.
ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: 0.005 [0.13] UNLESS OTHERWISE SPECIFIED
ORDERING INFORMATION
64-304121-00 64-304121-00-P = Panelized Version
Bristol, PA 19007-6810 USA TEL (215) 781-9956 * FAX (215) 781-9845 WWW.ARIESELEC.COM * INFO@ARIESELEC.COM
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
18068 Rev. AA
|
